ZHENGOU GroupZHENG'OU

Application

Rénovation de sols & vieilles dalles

Poudrage, béton usé et un planning de production qui ne peut pas s'arrêter des semaines. Des durcisseurs pénétrants et des primaires reconstruisent la surface sans arrêter l'usine.

Ce que ce sol doit endurer

Comprenez le mode de défaillance avant de choisir un système.

  1. 01

    Dusting concrete coats products, machinery and air filters — and it gets worse every year.

  2. 02

    The schedule cannot stop for weeks — the floor has to come back between shifts.

  3. 03

    Old coatings, oils and contamination decide what the new system can bond to.

  4. 04

    Budgets differ per zone — one factory rarely needs one solution everywhere.

Rénovation de sols & vieilles dalles

Systèmes de revêtement recommandés

Sélectionnés selon la charge — il n'existe pas de système universel, seulement celui qui convient.

01

Sealed & densified floor (no coating)

Complexe
Grind off the weak layer → densifier reacts inside the slab → progressive polish

For dusting, worn slabs that must return to service fast: nothing to peel, low cost per square metre, long service life.

Produits de ce système

Séquence d'application standard

Le même sol avec les mêmes matériaux dure des années de plus quand les travaux sont menés avec soin. Les six étapes ci-dessous constituent notre séquence standard pour les sols époxy : ce que fait chaque étape, selon quel norme, et ce que nous vérifions à la réception. Pour votre atelier, nous ajustons le nombre de couches et l'épaisseur aux charges réelles, aux produits chimiques et à la fenêtre d'arrêt.

  1. 01

    Substrate assessment

    Bond, contamination and moisture checks decide which renovation route is viable. The assessment decides between a resurfacing route and a full rebuild — pricing and schedule follow from it.

  2. 02

    Removal & repair

    Failed coatings and loose material ground off; cracks and holes repaired. After stripping, strength is re-tested; areas still short go deeper.

  3. 03

    Densifier route

    Penetration, reaction and progressive polishing bring the slab back harder than new. For dusting floors this route is preferred — no added film, the slab itself is hardened.

  4. 04

    Coating route

    Penetrating primer, build-up and a new topcoat matched to the zone duty. Renovation coatings lean on primer penetration; fast-absorbing areas take a double primer.

  5. 05

    Phased return to service

    Zones come back between shifts; production barely notices. Before each zone returns, a clean-down and protection briefing prevents cross-scratching.

Photos de chantier

Sols finis photographiés sur site — cliquez pour agrandir et examiner le détail.

Densified old slab

A dusting floor brought back to a dense, polished surface.

Renovated working floor

New build-up over a sound slab — production never stopped.

Projets représentatifs

Une sélection de projets réalisés par le groupe.

  • Automotive paint-shop renovation

    Renovating a live paint shop is a scheduling problem before it is a flooring one. For automotive clients including FAW, SAIC, Dongfeng, Beijing Benz, Geely, BYD, XPeng and NIO, we strip and re-lay floors zone by zone inside the owner's maintenance windows while the rest of the shop keeps producing.

  • Pharmaceutical workshop renewal without shutdown

    For clients such as Shineway Pharmaceutical, Huahai Pharmaceutical and Xinhua Pharmaceutical we have renewed workshop floors without stopping production: zoning, dust containment and low-odour solvent-free materials keep the clean areas clean while we work next door.

  • Residential garage refurbishment

    Older residential garages fail at the joints, the ramps and the oily bays first. On projects such as China Merchants' Cuican Mansion and the Xipai Jingyue development we renew traffic lanes and bays in phases, keeping half the garage usable throughout.

Questions fréquentes

Ce que les acheteurs demandent le plus lors du choix d'un revêtement de sol.

Our floor is dusting badly. Densifier or coating?

If you need a hard, dust-free concrete surface and speed, densify. If you need colour, chemical resistance or washability, coat it — often both routes combine zone by zone.

En savoir plus
Can we avoid tearing out the old floor?

Usually yes. As long as the slab is structurally sound, the new system goes over it after grinding and repair — no demolition.

En savoir plus
How fast can we get back to work?

Densified areas come back within days; coated zones follow the curing plan. Everything is phased so shifts keep running.

En savoir plus
The old coating is still sticking in places — can it stay?

Possibly — adhesion testing decides. Sound, well-bonded areas can stay and be bridged; failing areas must go, or they will drag the new system down with them.

En savoir plus

Parlez-nous de votre sol

Envoyez le support, la surface et les contraintes que le sol doit subir. Vous recevrez un système recommandé, un schéma de complexe et un devis — généralement sous un jour ouvré.

Demander un devis